JBL Control 50S/T
Regular price
$142.50
Sale price
$475.00
The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance. The Control 50S/T’s included two-piece easy-mount wall-bracket installs quickly ; The multi-point wall portion of the bracket attached to the wall and the self-guiding speaker-mounted bracket drops into place for a secure attachment. A cover over the Control 50S/T terminal cup keeps wiring neat. The Control 50S/T is mono. The crossover network built into the subwoofer provides proper signal routing and four satellite output connectors allow connection of the wires for the four Control 52 satellite loudspeakers. A Loop Out connector is also provided on the subwoofer for looping the full-range input signal to other loudspeakers or to other subwoofer/satellite systems.
Fits into a wide variety of decors
For distributed lines, or low impedance
With Control Contractor40 Series in-ceiling models
150 Watt (600 Watt peak) high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response
For either two or four satellite speakers per system
General Specifications
- Frequency Range (-10dB)
- 32 Hz – 200 Hz
- Frequency Response (±3 dB)
- 50 Hz – 150 Hz
- Power Capacity
- 300 Watts Continuous Program Power (2 hrs) ; 150 Watts Continuous Pink Noise (2 hrs) ; 200 Watts Continuous Program Power (100 hrs) ; 100 Watts Continuous Pink Noise (100 hrs)
- Sensitivity
- 95 dB (near corner), 89 dB (center of wall)
- Maximum SPL (1m)
- 115 dB average, 121 dB peak (near corner)109 dB average, 115 dB peak (center of wall)
- Impedance
- 8 ohms (in bypass/thru mode)
- Transformer Taps
- 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
- Drivers
- 200 mm (8 in) with polypropylene cone, butyl rubber surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum former
- Input Connectors
- Six removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm)
-
Enclosure
Enclosure Structural plywood. Port & terminal panels
- Top, bottom, front & bottom
- Mounting Hardware
- 2.3 mm (0.9 in) thick zinc-plated and painted cold-rolled steel
- Included Accessories
- Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker, terminal cover, 6 pcs 2-pin locking connectors, M6 screw for safety lanyard attachment.
- Grille
- Zinc-plated steel
- Coverage Angle
- Omnidirectional
Dimensions
-
Dimensions (H x W x D)
Dimensions (H x W x D) 356 x 391 x 203 mm (14.0 x 15.4 x 8.0 in)Wall Bracket
- Cabinet
- Net Weight (each)
- 9.0 kg (20 lbs)
- Shipping Weight
- 10.2 kg (23 lbs)
- 1 x Control 50S/T
- 1 x Wall bracket (both speaker and wall parts)
- 4 x M6 screws to attach to speaker
- 1 x Terminal cover
- 6 x 2-pin locking connectors
- 1 x M6 screw for safety lanyard attachment
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.
