JBL RALLYBAR S2
Regular price
$209.99
Sale price
$699.95
The 150Wrms (THD <1%) Class- D amplifier ensures powerful, high quality JBL Original Legendary Sound when you take the wheel or helm.
Expand your sound experience. Easily pair two RALLYBAR S2 speakers for true stereo or connect multiple JBL Auracast™-enabled speakers wirelessly—perfect for larger parties or multi-vehicle setups.
The innovative mounting kits design (patent pending), offers multiple position combinations on top and back to accommodate a variety of installation requirements.
The RALLYBAR S2 is nearly 1 kg lighter than Gen 1, making it easier to handle, transport, and install. This weight reduction, achieved through an upgraded sound system design, delivers greater convenience without compromising durability or performance.
IP67 rated water resistant protects soundbar speakers from dust ingress and powerful water jets.
Hit the trail with massive sound and deep, punchy bass. AI Sound Boost automatically fine-tunes your music in real time for peak power and crystal-clear performance—even outdoors at full volume.
RALLYBAR S2 can detect the audio source automatically according to the source priority definition: USB disk >Bluetooth®> RCA-IN audio source. Higher priority source can break-in Lower priority audio source.
RALLYBAR S2 Offers 3 different Gain settings when connected by RCA audio:2V, 4V, and 6V.
General Specifications
- Transducers
- 4x 2.75”(70mm) woofers; 2x 1”(25mm) Tweeters;2 x 7.2"(182.8mm)x3"(76.2mm)Racetrack Passive Radiators
- Output Power
- 150WRMS;300W PEAK
- THD at Rated RMS Power
- <1%
- Voltage Range: 9 - 16VDC
- Quiescent Current Draw:<0.9A
- Maximum Current Draw:25A
- Frequency response
- 45Hz-20kHz
- Signal-to-noise Ratio:> 80 dB
- Cable type:12AWG.
- Cable length:12 Feet (3.66m)
- Bluetooth® Version
- 5.4
- Bluetooth® profile:A2DP V1.4, AVRCP V1.6
- Bluetooth® transmitter frequency range:2400 MHz – 2483.5 MHz
- Bluetooth® transmitter power:≤ 15 dBm (EIRP)
- RCA:2Vrms(0.35Vrms - 2Vrms);4Vrms(0.7Vrms - 4Vrms);6Vrms(1.05Vrms - 6Vrms)
- USB format:FAT16, FAT32,EXFAT
-
Soundbar Dimension
Soundbar Dimension 21-5/32" x 5" x 4-5/8" (537.5 x 126.7 x 118mm)
- (L x W x H)
- Soundbar Weight
- 9.48 lbs (4.3 kg)
- Packaging dimensions (W x H x D):24" x 9.3" x 7.7" (611 x 236 x 195mm)
- Gross weight:15.1 lbs (6.85 kg)
- 1x Soundbar
- 2x Security cables
- 1xSmall Wrench
- 1 x L- Small Allen wrench
- 1xT-handle hex wrench
- 2x Straps with Velcro
- 1X G -Clamp
- 1x Keychain
- 1x 12ft (3.66m) power/ground wire harness
- 2x Rubber top covers
- 2x Mount cleats
- 2x Short M8 screws
- 2x Short M5 screws
- 2x Long M5 screws
- 2x M5 screw nuts
- 4X Flat washers
- 2X C -Clamps (2" )
- 2X C -Clamps (1.75" )
- 2X Thick rubber strips (for 1.5" pole )
- 2x Thin rubber strips (for 2" &1.75" pole)
- 1x Quick start guide
- 1x Safety sheet &warranty card
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.
